From a Suggested Size to an Approved Fixture.

15/18mm; start with 18mm for main bodies. HPL, melamine or paint. Confirm density, sealed edges, finish brand and batch.

15/18mm starting options. HPL, veneer or paint. Confirm timber, plies, moisture condition, edge sealing and core quality.

18mm starting option with melamine. Review fasteners, edge sealing and wear resistance; reinforce repeatedly assembled joints.

Backs 5–9mm; drawer bottoms 9–12mm. Review span, load and fixings; thickness alone is not a load rating.

18–25mm substrate; HPL thickness depends on brand. Confirm finished total thickness, texture, scratch requirement and color.

Primer and topcoat to the process sheet. Matte, semi-matte or gloss; confirm sample, sheen, color tolerance and full curing before packing.

Approximately 0.3–0.6mm veneer as a starting option. Confirm species, grain direction, joints and approved sample.

1–2mm exposed edge banding. Match panel color; specify glue line and rounded, burr-free merchandise-contact edges.

25 × 25 / 30 × 30mm tube with 1.2–1.5mm wall as initial options. Confirm grade, welding, supports and structural suitability.

Approximately 25–40mm frame sections. Match glazing channels, tracks and seals; confirm section drawing and connectors.

0.8–1.2mm decorative stainless sheet. Brushed, mirror or PVD options; decorative trim is not the load-bearing frame.

8mm initial top; 8–10mm are candidates for larger spans. Confirm glazing drawing, support width, holes and edge work.

6mm initial sides/doors; 6–8mm candidates for large panels. Confirm door gaps, locks, holes and tracks.

6–8mm initial shelves. Confirm clear span, support points and distributed-load testing before assigning a capacity.

Match structural thickness. Low-iron glass improves visual clarity; it does not establish UV protection.

3–5mm initial card stands; cover thickness depends on panel size. Review polished edges, bonding, scratching and deflection.

Specify glazing or film model separately. UV wavelength range, test method, report and service life require evidence; ordinary glass/PMMA is not assumed UV-filtering.

3–5mm PMMA or lined panel trays. Use smooth edges and actual holder samples; confirm groove width/depth and handling clearance.

Thin felt, microfiber or an approved inert pad. No bare-card contact or unsupported archival-grade claim; confirm dyes, odor and adhesive.

15–30° from horizontal as an initial tray angle. Check reflections, obscured rear rows, row pitch and retaining-lip height.

4000K preferred; 3000/5000K options. Keep a consistent white light on card faces; colored light is for atmosphere. Confirm LED model/batch.

Lighting selection target: Ra ≥90. Check strip documentation and sample illumination.

Approximately 4.8–9.6W/m initial strip options. Use aluminum heat dissipation and diffuser; calculate length, total load and temperature rise.

DC24V is a candidate output; input follows destination. Confirm voltage, frequency, plug, dimming and manufacturer load headroom.

Switch with optional dimmer/timer. Confirm protocol, accessible controls and heat test; control brightness and exposure duration.

Sliding/hinged showcase lock to door type. Optional keyed-alike or independent keys. A lock is not a certified burglary rating.

350–550mm candidate slide lengths; optional full extension and soft-close. Confirm loaded drawer width, clearance and cycling test.

Approximately 95–110° candidate opening. Door thickness and weight determine quantity/model; confirm mounting and collisions.

80–120mm initial recessed plinth. Confirm total-height convention, leveling travel, floor and per-foot rated load.

50–75mm candidate caster diameter with brakes. Select by total mass, floor and operation; review plate and rolling test.

Steel brackets or connectors to a suitable substrate. Engineer attachment for tall, shallow-wall and multi-drawer units; test empty/loaded stability.

Corner guards, cushioning and carton/crate. Separate glass and secure shelves. Confirm numbered package dimensions and gross weights.

Use actual loaded count. Record holder model, rows, tiers and handling checks. Keep display capacity separate from drawer inventory.

Verify panel, glass and electrical documents separately for destination and scope. Component grades do not establish whole-cabinet certification.

63.5 × 88.9mm is the card size supported by the referenced Ultra PRO product, not a universal size for every TCG. Choose the protective sleeve before defining a display slot.

The source gives an outer width and height of 76.2 × 101.6mm. Trial a clear width of 80–85mm and height of 110–120mm using the actual holder. Measure its outer thickness; 35pt describes card cavity thickness.

Measure the complete sleeve combination. Record the brand, model and single- or double-sleeve arrangement; fit the outermost sleeve.

Specify the exact 35pt, 55pt, 100pt or other model. Measure the exterior and allow retrieval clearance. The point rating does not state the outer holder thickness.

Measure the grading company, holder generation, card format, external thickness and raised edge. Initial trial cells may be 90–100mm wide and 145–160mm high; verify each actual holder.

Use independently sized wide slots or compartments. Record the full outer envelope and finger clearance rather than assuming the standard slab grid will fit.

Lay out a separate landscape row using the rotated holder dimensions. Recalculate cards per row using its new displayed width.

Measure the complete retail package. Record hanging-hole location, center of gravity and stocked row depth. Loose booster pack measurements do not describe blister packaging.

Measure the shrink-wrapped exterior, box weight and planned boxes per shelf. Allow vertical and front retrieval space.

Measure closed exterior dimensions and opening movement. Upright storage may need retaining edges; flat storage needs retrieval room. Advertised card capacity is not the package size.